Home Sewing Tutorials RealTree Lakeside Sunset Quilt Panel Tutorial

RealTree Lakeside Sunset Quilt Panel Tutorial

written by Sarah

Sew a RealTree Lakeside Sunset Quilt
with our free step-by-step tutorial!

With just one Realtree Lakeside Sunset Fabric Panel, you can sew a rustic wall hanging or warm thrown quilt.  The quilt featured in this tutorial is approximately 60 1/2″ x 71 1/2″.

Supplies/Cutting: In addition to your standard sewing supplies, you need:

*All seams are sewn at 1/4”.

Step 1: Cut out the panel, leaving a 1/4” black border on all sides. It should measure 42 1/2” x 34 1/2”. Sew 2 1/2” wide U Brown Moda strips to all sides of the panel.

Step 2: Sew 2 1/2” wide Dried Herb Grunge strips to all sides. Repeat using 2 1/2” wide Navy Grunge, and again using 2 1/2” wide Tan Branches fabric.

Step 3:  Cut the following pieces to make the top and bottom blocks and piece together as shown in the graphic above.

Dried Herb Grunge, U Brown, & Tan Branches: 4 – 2 1/2″ x 13” of each.  Navy Grunge: 2 – 42 1/2” x 13″

Step 4: Cut the following pieces to make the right and left side blocks and piece together as shown in the graphic above.

Dried Herb Grunge, U Brown, & Tan Branches: 4 – 3 1/2 x 2 1/2 of each.  Navy Grunge: 2 – 3 1/2” x 40“ 4 – 3 1/2” x 13

Step 5: Sew the top and bottom blocks to the panel block. Sew the right and left side blocks to the panel block.

Step 6: Trim any remaining excess fabric. Add the binding along all raw edges using a 1/4” seam.

We are so excited to see what you make! Be sure to tag Sewing Parts Online in a picture of your latest sewing projects! EX: @SewingPartsOnline or #SewingPartsOnline

 

Be sure to check out our full collection of fabric panels. We are always adding new prints!

SHOP NOW >>

You may also like

1 comment

KyleLE April 20, 2018 at 9:03 pm

next time

Reply

Leave a Comment