The Husqvarna Viking Aqua Magic Wide Stabilizer is a soft, fabric-like water-soluble stabilizer that completely dissolves in water, leaving no residue behind. Designed for projects requiring 100% stabilizer removal, it ensures a smooth, flexible finish without adding stiffness to your fabric. Ideal for delicate embroidery, appliqué, heirloom sewing, and free-standing lace, Aqua Magic provides temporary support during stitching and rinses away effortlessly to maintain the fabric's natural drape. Measuring 20" x 10 yards, this versatile, water-soluble stabilizer is essential for achieving clean, professional embroidery results without any stabilizer traces.

Recommended Use:
For decorative all-yarn stitched scarves, this water-soluble adhesive securely holds ribbons, yarns, fabrics, and other creative materials in place during embroidery. It serves as an excellent alternative to sticky stabilizers, making it ideal for small items that don't fit in a hoop or for hoop-less embroidery, with the added benefit of dissolving completely after washing—leaving no trace behind. Perfect for light to medium-weight woven and knit fabrics, including slinky knits, batiste, organza, organdy, chiffon, tulle, netting, towels, terry cloth, minky, and polar fleece.

How to Use:

1. Cut the Stabilizer Cut a piece of Aqua Magic stabilizer large enough to fit in the hoop, ensuring at least 1" extra on all four sides.
2. Prepare the Stabilizer Hoop the stabilizer with the paper side facing up.
3. Expose the Adhesive Surface
   Score the release paper by drawing an X using a needle or pin.
   Peel back the paper to reveal the tacky adhesive surface.
4. Position the Fabric Place the fabric or item to be embroidered right side up in the center of the exposed sticky surface.
5. For Yarn or Ribbon Scarves
   Arrange yarns and ribbons on the sticky surface.
   Cover with a water-soluble film before embroidering to hold them in place.
6. Complete the Embroidery Stitch the design as usual.
7. Remove Excess Stabilizer Trim away the outer edge of the stabilizer.
8. Dissolve the Stabilizer
   Submerge the embroidered piece in warm to hot water.
   Move the item around continuously to help remove stabilizer fibers.
   Keep submerged for 10 minutes to ensure full dissolving.
9. Rinse Thoroughly Rinse with very warm water to remove all stabilizer residue.
10. Repeat if Necessary For dense stitching or heavier fabrics, repeat the process.
    If using hard water, add a water softener or use distilled water for better dissolvability.
11. Dry the Item Place on a flat surface until completely dry.

The Husqvarna Viking Aqua Magic Wide Stabilizer ensures clean, precise embroidery results with no leftover residue, making it perfect for delicate fabrics, free-standing lace, appliqué, and specialty embroidery techniques.