Make Your Fabrics Pop With This Concentric Squares Quilt Block!

Look at this beautiful design! I call this one Concentric Squares. There are quite a few pieces, but don’t let that fool you. Once you have everything cut, it comes together pretty quickly.

If you’re familiar with Courthouse Steps, you’ll recognize how I build this block. We start with a center square and add strips to the sides, then the top and bottom. The difference is that I alternate narrow and wide strips, which really changes the look.

Choosing My Fabrics

For my original blocks, I used Flames Fabric Variation 1, one of the fabrics we digitally print here at Sewing Parts Online. I chose black for the background because it really makes those flames stand out.

I ran out of the Flames fabric while putting everything together, so you’ll also see me using Elegant Marble Fabric Orange in the demonstration. It has a similar look and works nicely with the black.

Now, black can be a very powerful background. Sometimes it draws so much attention that you don’t notice your beautiful print! That’s why I used different strip widths. In one block, I want you to notice the print. In the other, I want the black to have its moment.

What You’ll Need to Cut

Here’s a little tip before you start: lay your print fabric on top of your background fabric and cut them together. You need the same pieces from both, so cutting two at a time saves quite a bit of work.

These cuts make two coordinating blocks. Repeat the list if you’re making four.

From each fabric, cut the following:

Narrow strips, or what I call my “thins”:

  • Two 1½″ × 2½″ strips

  • Two 1½″ × 4½″ strips

  • Two 1½″ × 8½″ strips

  • Two 1½″ × 10½″ strips

Wide strips, or my “thicks”:

  • Two 2½″ × 4½″ strips

  • Two 2½″ × 8½″ strips

  • Two 2½″ × 10½″ strips

  • Two 2½″ × 14½″ strips

You’ll also need one 2½″ square from each fabric for your centers.

I like to keep the thins and thicks in separate piles so everything is easy to find.

Let’s Put It Together

Use a ¼″ seam allowance throughout, and press between additions. We’ll start with the print-centered block.

Start in the middle.

Take your 2½″ print square. Add a 1½″ × 2½″ background strip to each side, then a 1½″ × 4½″ background strip to the top and bottom. That’s our first narrow round.

Now add a wide round.

Switch to your print fabric. Sew a 2½″ × 4½″ strip to each side, then add a 2½″ × 8½″ strip to the top and bottom.

See how that wider section gives your print a little more room to show?

Go back to your thins.

Using the background fabric again, add a 1½″ × 8½″ strip to each side. Then sew a 1½″ × 10½″ strip to the top and bottom.

Finish with your thicks.

For the last round, use your print fabric. Add a 2½″ × 10½″ strip to each side, followed by a 2½″ × 14½″ strip at the top and bottom.

That’s all there is to it! Thin, thick, thin, thick. Each time, you’re adding the sides first, then the top and bottom.

Reverse the Fabrics for Your Second Block

For the next block, start with your background square and switch the fabric placement. Your print will make the narrow rounds, and your background will make the wide rounds.

When you put those blocks beside each other, you’ll see why I like this combination so much. The print catches your eye in one, and the black stands out in the other.

There’s a little preparation involved, but the sewing goes quickly once you get going. I absolutely love how this one turned out, and I hope you’ll give it a try!

Share this tutorial with someone who would enjoy it, and follow Sewing Parts Online on Facebook, Instagram, TikTok, and YouTube for more projects with me.

Happy sewing!

Published on  Updated on