Learning to use the longarm machine and frame.
100%
100%
100%
Red Snapper Quilt Loading System
Brand: Non-Branded
Item #: QFLS10
● In stock and ready to ship
- Regular price
- $109.99
- Regular price
-
$129.99 - Sale price
- $109.99
- Percent Saved
- Save 15%
Fast Free Shipping
Free Shipping on all USA orders over $49*
Easy 60-day returns
Shop risk-free with easy returns.
Price Match Guarantee
Price-Match Guarantee
The item must be above the manufacturer's wholesale price.
The item must be sold by an authorized internet retailer for the item's brand.
Auctions and eBay listings are NOT eligible for price matching.
The item on our site must be identical in model/part number to the competitor's item.
If we offer free shipping for the item, does the lower priced website charge for shipping? If so, we may adjust our lowered price to match the difference.
The lower cost item must be available, in stock, and purchasable on the other website.
Certain manufacturers have minimum advertised prices, which may prevent us from being able to match a lower price.
Price-Match Guarantee
The item must be above the manufacturer's wholesale price.
The item must be sold by an authorized internet retailer for the item's brand.
Auctions and eBay listings are NOT eligible for price matching.
The item on our site must be identical in model/part number to the competitor's item.
If we offer free shipping for the item, does the lower priced website charge for shipping? If so, we may adjust our lowered price to match the difference.
The lower cost item must be available, in stock, and purchasable on the other website.
Certain manufacturers have minimum advertised prices, which may prevent us from being able to match a lower price.
Red Snapper Quilt Loading System Details
Product Description
Say goodbye to pins, pokes, and painstaking setup. The Red Snapper Quilt Loading System is the go-to loading solution for longarm and mid-arm quilters who want to spend less time wrestling their quilt onto the frame — and more time actually quilting.
Traditional loading methods require pinning the quilt backing and top to your canvas leaders one pin at a time, a process that's tedious, time-consuming, and notorious for unexpected finger pricks. Red Snappers replace all of that with a simple, satisfying snap. Hollow rods are sewn into casings along the edges of your frame's leader cloth, and the Red Snapper clamps press directly over the rod, securing your quilt backing and quilt top with even, consistent tension across the full width of the frame — no shifting, no puckering, no guesswork.
Quilters who've made the switch consistently report cutting their loading time in half or more, with unloading measured in seconds rather than minutes. The result is evenly distributed tension across the entire width of the backing, which means beautifully loaded quilts every time. And because setup is so consistent, the system works just as well for beginners as it does for experienced professionals running high-volume quilting businesses.
Red Snappers are compatible with virtually any brand of longarm quilting frame. The clamps can be trimmed to fit smaller frames using kitchen scissors or a sharp pocket knife. One complete set provides enough rods and clamps to outfit all three rollers of your frame.
Important sizing note: Choose your set size based on your frame table size, not the length of the clamps themselves. The actual usable clamp length in each set is designed to accommodate your carriage travel and handlebars:
- 10 Foot Set – 114" of usable clamp length
- 12 Foot Set – 133" of usable clamp length
What's Included
10 Foot Set:
- 18 Hollow Rods
- 15 x 19" Clamps
- 6 x 2" Clamps
- 15 Dowel Connectors
- Instructions
12 Foot Set:
- 21 Hollow Rods
- 21 x 19" Clamps
- 6 x 2" Clamps
- 18 Dowel Connectors
- Instructions
Note: Initial setup requires sewing a sleeve/casing onto your frame's canvas leaders to accommodate the hollow rods. This is a one-time process, and step-by-step instructional videos are available from the manufacturer to guide you through it.
Product Description
Say goodbye to pins, pokes, and painstaking setup. The Red Snapper Quilt Loading System is the go-to loading solution for longarm and mid-arm quilters who want to spend less time wrestling their quilt onto the frame — and more time actually quilting.
Traditional loading methods require pinning the quilt backing and top to your canvas leaders one pin at a time, a process that's tedious, time-consuming, and notorious for unexpected finger pricks. Red Snappers replace all of that with a simple, satisfying snap. Hollow rods are sewn into casings along the edges of your frame's leader cloth, and the Red Snapper clamps press directly over the rod, securing your quilt backing and quilt top with even, consistent tension across the full width of the frame — no shifting, no puckering, no guesswork.
Quilters who've made the switch consistently report cutting their loading time in half or more, with unloading measured in seconds rather than minutes. The result is evenly distributed tension across the entire width of the backing, which means beautifully loaded quilts every time. And because setup is so consistent, the system works just as well for beginners as it does for experienced professionals running high-volume quilting businesses.
Red Snappers are compatible with virtually any brand of longarm quilting frame. The clamps can be trimmed to fit smaller frames using kitchen scissors or a sharp pocket knife. One complete set provides enough rods and clamps to outfit all three rollers of your frame.
Important sizing note: Choose your set size based on your frame table size, not the length of the clamps themselves. The actual usable clamp length in each set is designed to accommodate your carriage travel and handlebars:
- 10 Foot Set – 114" of usable clamp length
- 12 Foot Set – 133" of usable clamp length
What's Included
10 Foot Set:
- 18 Hollow Rods
- 15 x 19" Clamps
- 6 x 2" Clamps
- 15 Dowel Connectors
- Instructions
12 Foot Set:
- 21 Hollow Rods
- 21 x 19" Clamps
- 6 x 2" Clamps
- 18 Dowel Connectors
- Instructions
Note: Initial setup requires sewing a sleeve/casing onto your frame's canvas leaders to accommodate the hollow rods. This is a one-time process, and step-by-step instructional videos are available from the manufacturer to guide you through it.
Customer Reviews
Customer Reviews
Overall rating: 4.8 / 5 from 25 reviews.
I was so excited to get these! They arrived promptly. I was able to set them up after watching a video on how to with no problems. I have been able to get quilts loaded on the longarm so much faster than pinning. Love these!!!
Picture shows the old Red Snapper Quilt Loading System I wanted to get. But comes in as the new 21 piece - 19" Red Snapper Quilt Loading System instead. Very disappointed due to the lack of product updating on the website and seems like no communication with their supplier when there is a change to an item.
Exactly what I expected! Works great cut my quilt loading time by 75%.
I was tired of sticking my fingers with my pins. I saw someone using the red snapper system. So I bought them. So far so good.
Initially planned on returning since the product isn’t what is pictured on website. Website shows longer pieces, and I received a package of 21 (?) approx. 18” long pieces with dowel pegs to attach rods to preferred length. I decided to try them and found I actually liked them. It was faster to load and unload a quilt on the long arm. I recommend this product and am keeping.
They work great!
I love the red snappers! I sewed the placket on my leaders, put the red rods together and ran them through the placket, put the leaders back on the machine and was ready to load the quilt top. It took me less than half the time to put the quilt than pinning the top and backing on. The snappers are tight and hold the quilt tight. They will make loading a quilt so much easier. Wish I would have bought them earlier!!
Getting used to them. Stiffer than I thought
Very easy to use. No more pin sticks.
Received the order quickly. It’s what I wanted.
I had a friend come over to show me how to attach them and use them. This saves me so much time attaching a quilt. Thank you.
I’ve seen videos of the Red Snapper in action but I had to experience it for myself to realize how much faster it is with Red Snappers vs pinning. I’m really enjoying them!
Makes it extremely easy to load a quilt! And I don’t miss putting dozens of pins in place!
Love the ease of using the red snapper instead of pins. Works great!!!
A little hard to press on but a lot less painful than all the pin holes in my fingers, getting easier as I use them.
After a little time getting use to snapping them on, I find it the fastest and easiest way to get my quilts on and off my longarm.
I haven't used them yet, but I watched videos. Looking forward to the opportunity to use them!
I haven't used them yet, but I watched videos. Looking forward to the opportunity to use them!
This will save invaluable time in loading my quilts! Awesome product and quick shipping as well!
Hoping this will help make quilting go faster
Just what I was looking for .... excellent!
The best! So much easier to load a quilt top
I haven't got to use this product yet, but I'm really excited to. Great idea!
So far I have really liked the red snapper. My only complaint is that from the vague description, I could not tell how many pieces were in a package, so I didn't know how many packages to order. I purchased two sets, and realized that I only need one. Now I have an extra set, having spent almost$100. needlessly. Is there a way to return the unopened second set?.