Elna eXtend Covermax Coverstitch Machine

For professional-level finishing, you are going to want Elan's eXtend Covermax Serger. This machine can do it all! It's equipped with a built-in top cover hem guide, so you'll now have the ability to create industrial-quality top cover stitches. The Covermax offers enhanced tension controls that can be adjusted for different fabric types, a built-in needle threader, LED lights, a differential feed ratio of 0.5-2.25, a free arm, 1000 stitches per minute, and so much more. You'll get smooth, consistent stitches on Elna's Covermax Serger with its ball-bearing driven motor shaft that produces vibration-free sewing.

When you are ready to take the next step in perfecting your craft, the Covermax is the natural progression of this and complements your other machines. Enjoy professional results with your hemlines, utilizing double and triple needle cover stitches, as well as chain stitching that can be functional or decorative depending upon your desired application. This three-needle, five-thread machine opens up a world of creative possibilities while still offering you all the ease and benefits you can expect from an Elna machine.

Color-Coded Threading

Easily thread your upper needles in moments with its easy-to-see color-coded thread guide. Best of all, the lower loopers are even easier to thread! Pull the thread through, push the looper closed, and you're ready to get started. Also included is a needle threader if you have any struggles.

Snap-On Presser Foot Compatible

Easily go from one presser foot to the next on Elna's eXtend Covermax Coverstitch Machine, no screwdriver required! This coverstitch machine makes it easy to swap between your included and optional presser feet.

VERTICAL NEEDLE PENETRATION

Unlike other machines that use slanted needles, the Covermax uses needles that are set vertically. Slanted needles tend to push and damage fabrics, while Elna's Covermaxonly moves up and down. This up and down movement protects your materials and helps to prevent needle deflection.

ONE-HAND THREAD CUTTER

Quickly and efficiently cut your thread tails in one easy motion with the built-in thread cutter. Best of all, you can do it one-handed!

25-Year Limited Warranty

Elna will ensure your machine's performance for 25 years from when the machine is purchased. Coverage is limited to repair or necessary replacement of parts caused by defects in quality and materials. Faults in electrical components will be for five years. One year of free labor by an Authorized Elna Retailer is included, usually by the dealership where you purchased your machine.